
HZDZ-3電力品質分析システム
概要
HZDZ-3 power quality analyzer is specially help locate, predict, prevent and troubleshoot power quality problems in three phase and single phase power distribution systems
技術データ
1.入力特性
電圧測定範囲:0-200V-800V、自動カッティングギア。
現在の測定範囲
クランプトランス(3種類):5A / 25A(標準)
100A / 500A(オプション)
400A / 2000A(オプション)
1000A / 5000A(オプション)
2.精度
電気的パラメータの測定セクション:
Voltage: ± 0.1 percent
Frequency: ± 0.01Hz
Current, power: ± 0.5 percent
Phase: ± 0.2 degree
3.動作温度:-10度プラス40度
4.充電電力:220V AC、45Hz-55Hz周波数
5.ホスト電力:3VA以下
6.バッテリーの最大動作時間:10時間以下
7.断熱材:
1) The insulation resistance between the voltage, current input terminal and the housing Less than or equal to 100MΩ.
2)動作電力入力とシェルの電源周波数で1.5KV(有効値)に耐えます。これは1分間続きます。
8.サイズ:320mm 240mm 130mm
9.重量:2。0 Kg
ノート
1.感電を防ぐため、測定プロセス中はテストラインの金属部分に触れないでください。
2.測定配線は、個人の安全を確保するために、指示に厳密に従って動作する必要があります。
3.アース付きの電源コンセントのより良い使用。
4.過剰な電圧および電流制限の場合は、動作させないでください。
5.各クランプは、パネルの対応するソケットに準拠している必要があります。一致していないと、テスト結果に影響します。
6.機器に接続するときは、テスト対象デバイスの前に機器にアクセスするという原則と、電圧ラインとクランプのために機器を分割するときは、機器の前にテスト対象デバイスを取り外すという原則に従う必要があります。
7. Pay attention that you must turn off the power supply switch whenever testing is finished, because sometimes the LCD backlight automatically goes into power-saving mode, but the LCD screen does not display while the instrument is still working as normal. That's why you must turn off the power switch.
8. When monitoring during a long time, be sure to connect to the power wire, otherwise the internal power supply will be so exhausted that it'll be unable to complete the monitoring.



人気ラベル: hzdz-3電力品質分析システム、中国、サプライヤー、メーカー、価格、販売
お問い合わせを送る

